There are two fundamental choices when considering a vapor degreasing system to clean your parts. There is a vapor immersion unit and a vapor/spray unit. The vapor immersion unit is a this type of degreaser has two sumps which are filled with solvent cleaners (a boil and a cold sump). The cold sump is filled with clean solvent and used to rinse the products needing to be cleaned. The solvent vapor degreaser for metal can be used to ensure that all areas of an engine or working part are clean and ready for use. In many cases, even a tiny speck of oil can cause much damage. To guarantee there is no grease or particles left behind, the equipment must be properly cleaned with quality parts cleaning systems. Learn about the second type of degreaser below.
Additional information: Degreasing System Information
The second type of solvent vapor degreaser for metal is a vapor/spray unit. In this type of unit, solvents are boiled in the bottom of one sump. On a perforated stand above the boiling cleaning solution, the parts are stored and instead of immersing them, the vapors made by the boiling solution surround the parts, ensuring a complete clean. This type of cleansing will ensure that oil, particles and soil are completely removed.
Ultra-Kool is your number one resource for degreasers and other parts cleaning systems. No matter what your industry, you will find a great selection of new and used cleansing systems available. Our products are affordable and will also help you save money over time because most systems use smaller amounts of solvents. This is good for the world and good for your company! Contact Ultea-kool.com today to learn more about the products we carry, for application assistance, or for technical guidance. We look forward to hearing from you.
For application assistance and technical guidance contact:
Phone: 1-610-367-2019 Fax: 1-610-367-8396
E-Mail: info@ultra-kool.com
